Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging. Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:... What stands out most is the size of the sensor. Shelly’s Motion is big and heavy. It’s nicely designed so it’s not ugly, but it will be instantly visible thanks to its size and (optional) LED embedded inside the PIR shell. The reason why Shelly Motion is so big is the internal battery that lets the PIR sensor connect to the network for a year (or more) on a single charge. The integration uses Device Name to name its entities if the device has only one relay or no relays at all.

IMPORTANT: If the Device has not been added into your Wi-Fi network in 3 minutes, it will switch off. Press briefly the Reset button to start it again. Pressing the Reset button while the Device is in AP mode will turn off the Device. 3. Inclusion to Shelly Cloud If Device Name or Channel Name is set in the device, the integration will use them to generate the entities’ name.If only the device name is set, and the device has multiple channels, the channel number will be appended to the entity name (e.g., Channel 2). In case device name and channel names are not set, the entity name will be generated by the Device Type, Device ID and Channel Number. CAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children! 4. Connecting manually to a local Wi-Fi network

The Shelly Motion’s bulbous sensor has a reasonable appearance, and its LED can be disabled. [ Further reading: A smart home guide for beginners ]Blind time: Select a blind time in minutes (from 1 to 10) after last detected motion. Select a blind time from the dropdown menu. Set the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion. Motion triggers can be associated with a schedule and brightness levels. Settings allow Shelly Motion2 to set the number of consecutive motion events (1-4) before the notification is issued and the timeout can be increased up to 1440 min.

The Device can be managed and controlled through its embedded web interface too. Make sure Shelly Motion 2 is in AP mode. Open the Device Web interface at http://192.168.33.1 when connected directly to the Device access point. The red charging indicator above to the charging port will be on while the Device is charging. The indicator will go off when the battery is fully charged.

Change the current device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. Factory Reset Other than the micro USB (hey guys what happened to USB-C?) and a reset pin, there are no other ways to interact with the device physically. WiFi protocol enables hub-less operation which is great for anyone just looking for an easy start and the well-developed app and web interface provide an array of interesting options. Shelly Motion – unique PIR Apart from temperature offsets, settings allow you to set the units, and monitor the threshold to increase or decrease the recording sensitivity. As a brightness sensor It’s pretty sensitive at low settings, and I could imagine this can be activated by passing lorries outside if your walls are prone to movement like this. With a bit of trial and error, you could use this to create an earthquake alarm, in case you sleep as deep as me. Shelly app CAUTION! Be careful not to insert the pin into the round hole of the charging indicator ( A). The reset button has an oblong shape ( B).