BENFEI Active DVI-D to VGA Adapter, DVI-D 24+1 to VGA Male to Female Adapter

Product Information

DVI (Digital Visual Interface) is a hardware specification for computers and display equipment that is similar to VGA. DVI-D (Digital Visual Interface Digital) refers to DVI technology that is used exclusively with digital devices, while other versions of DVI can be used with analog devices. While VGA technology was made for analog computers, DVI technology is more modern and is intended for digital computers and display equipment, such as monitors and projectors. While VGA and DVI produce similar quality on regular monitors, DVI produces much higher picture quality on LCD monitors and other high-definition equipment. One of the purposes of DVI stream encoding is to provide a DC-balanced output that reduces decoding errors. This goal is achieved by using 10-bit symbols for 8-bit or less characters and using the extra bits for the DC balancing.

The maximum resolution on a DVI-D dual link is 2560×1440 at 60 Hz, the same as the DVI-I dual link resolution. Because P&D was a physically large, expensive connector, a consortium of companies developed the DFP standard (1999), which was focused solely on digital video transmission using a 20-pin micro ribbon connector and omitted the analog video and data capabilities of P&D. [4] :3 [5] :4 DVI instead chose to strip just the data functions from P&D, using a 29-pin MicroCross connector to carry digital and analog video. [8] Critically, DVI allows dual-link TMDS signals, [9] meaning it supports higher resolutions than the single-link P&D and DFP connectors, which led to its successful adoption as an industry standard. Compatibility of DVI with P&D and DFP is accomplished typically through passive adapters that provide appropriate physical interfaces, as all three standards use the same DDC/EDID handshaking protocols and TMDS digital video signals. [10] :§1.3.7MicroCross DVI Connector System: Digital Visual Interface Standard" (PDF). Molex. December 2000 . Retrieved 31 January 2023.

DVI is the only widespread video standard that includes analog and digital transmission in the same connector. [13] Competing standards are exclusively digital: these include a system using low-voltage differential signaling ( LVDS), known by its proprietary names FPD-Link (flat-panel display) and FLATLINK; and its successors, the LVDS Display Interface (LDI) and OpenLDI. To convert DVI to HDMI you’ll need a passive physical adapter. The good news is both DVI-I and DVI-D can be converted to HDMI because they both use digital signals. The Best DVI Cable for 144hz | The Technology Land". thetechnologyland.com. 2019-08-21 . Retrieved 2022-07-14. Docter, Quentin; Dulaney, Emmett; Skandier, Toby (2012). CompTIA A+ Complete Deluxe Study Guide: Exams 220-801 and 220-802. Indianapolis, Indiana: John Wiley & Sons, Inc. ISBN 978-1118324066. HDMI is a newer digital audio/video interface developed and promoted by the consumer electronics industry. DVI and HDMI have the same electrical specifications for their TMDS and VESA/DDC twisted pairs. However HDMI and DVI differ in several key ways.To ensure a basic level of interoperability, DVI compliant devices are required to support one baseline display mode, "low pixel format" (640×480 at 60Hz). DVI-D single link has the same bandwidth as DVI-I single link, so the maximum resolution is the same at 1920×1200 at 60 Hz.

DisplayPort (a license-free standard proposed by VESA to succeed DVI that has optional DRM mechanisms) / Mini DisplayPort Intel Newsrom – Leading PC Companies Move to All Digital Display Technology, Phasing out Analog (8. December 2010) To promote interoperability between DVI-D and HDMI devices, HDMI source components and displays support DVI-D signalling. For example, an HDMI display can be driven by a DVI-D source because HDMI and DVI-D both define an overlapping minimum set of supported resolutions and frame buffer formats. a b "VESA Standards". Video Electronics Standards Association. Archived from the original on January 17, 1999.

In some cases, DVI can carry over audio when connected to a physical HDMI adapter. For more information about that, take a look at this article. If you have the option to use HDMI or another port liked Display Port, use those instead, DVI and VGA should only be used as a last resort because the quality isn’t the best. DVI is limited to the RGB color model while HDMI also supports YCbCr 4:4:4 and YCbCr 4:2:2 color spaces, which are generally not used for computer graphics. Kruegle, Herman (2006). "8". CCTV Surveillance: Analog and Digital Video Practices And Technology. Butterworth-Heinemann. p.268. ISBN 0-7506-7768-6.

So you can use it to connect to a secondary old monitor or TV that only has DVI or VGA inputs. The output resolution will be good enough for documents and watching movies but it won’t be true-HD and I definitely do not recommend it for games. Unified Display Interface (UDI) was proposed by Intel to replace both DVI and HDMI, but was deprecated in favor of DisplayPort. VESA Plug and Display (P&D) Standard, Version 1" (PDF). Video Electronics Standards Association. June 11, 1997. Archived from the original (PDF) on July 4, 2003. If a depth greater than 24 bits per pixel is desired, the least significant bits are sent on the second link.The DVI connector on a device is given one of three names, depending on which signals it implements: a b "Digital Visual Interface Revision 1.0" (PDF). Digital Display Working Group. 2 April 1999 . Retrieved 31 January 2023. In addition to digital, some DVI connectors also have pins that pass an analog signal, which can be used to connect an analog monitor. The analog pins are the four that surround the flat blade on a DVI-I or DVI-A connector. A VGA monitor, for example, can be connected to a video source with DVI-I through the use of a passive adapter. Since the analog pins are directly compatible with VGA signaling, passive adapters are simple and cheap to produce, providing a cost-effective solution to support VGA on DVI. The long flat pin on a DVI-I connector is wider than the same pin on a DVI-D connector, so even if the four analog pins were manually removed, it still wouldn't be possible to connect a male DVI-I to a female DVI-D. It is possible, however, to join a male DVI-D connector with a female DVI-I connector. [12]