ELEGOO Neptune 3 Plus 3D Printer

Product Information

The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. As is the case with most FDM 3D printers, there was no suitable Cura profile when the Neptune 3 Plus was released. However, since there is a good profile in Elegoo Cura Slicer, you can simply copy the settings there and paste them into Cura. Unlike most other 3D printers, the Neptune 3 Plus has six adjustment screws under the print bed, not just four. This is simply due to the size of the print bed and allows for finer tilt adjustment. Features & Design Large Print Volume

Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB. We then decidedto try something a little more intricate with a few more parts for the final print. Gambody's Klingon Bird of Prey is shown here; it is printed in several pieces, and gears are included to allow the wings to move from the normal to landing position. This print made good use of the build volume because we could fill the bed with parts, and, as with earlier prints, we used the same slicer settings with the exception of a few minor support settings adjustments. Ease of Use】PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet. Well, I say impossible, but I did make an honest mistake. The large collection of neatly bundled wires from the bed first stop at the X axis motor (on the left hand side of the vertical gantry) before carrying on to the print head itself where they terminate. As the machine is shipped with the X axis at the top of the gantry I, without thought or warning from the instructions, passed the wire behind the brace and into the print head.The pad comes with an accelerometer that you can mount on the print head. This allows you to increase the print speed extremely without creating print errors. I have tested the pad myself and am very enthusiastic about it.

Therefore, 3D printers like the Neptune 3 Plus with a direct drive extruder are much better suited for flexible filaments. PEI Print Bed

The Elegoo Neptune 3 Plus ticks all the boxes when it comes to FDM 3D printers.

The printers main selling point is its much larger build volume. Measuring 320 x 320 x 400mm it provides a massive 40,960cm³ of printing room. This is over 254% larger than the Neptune 3 Pro's build volume of 16,065cm³ (its build volume measures 225 x 255 x280mm). This is a substantial print size ability allowing you to print bigger objects in one piece, or many smaller/ standard size items unattended. The Neptune 3 Plus is best operated with the Cura clone from Elegoo. Also, the settings from this slicer can be imported into Cura. ELEGOO Neptune 4 Plus FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 320x320x385mm³/12.59x12.59x15.15 Inch Printing Size Print volume: Although the Ender-3 S1 Plus is a relatively large 3D printer, the print volume of the Neptune 3 Plus is still one and a half times larger. So if print volume is important to you and print speed is secondary, the Neptune 3 Plus is recommended. Many modern 3D printers have a PEI print bed, as it provides almost perfect print bed adhesion for most filaments. The rough surface provides enough grip for the hot filament.

You can find the correct Cura settings in this article: Neptune 3 Plus | Cura Settings & Profile – Guide & List Print Quality C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon. Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.The Neptune 3 Plus contains all the features required for fine-tuning the printer, including the manual and auto-level menus as well as configuration options for changing your printer's settings as well as acceleration and jerk, making it simple to make adjustments. A coiled cord that connects the LCD to the printer and enables screen removal makes it much simpler to change options and load prints thanks to the magnetic cradle. Dual-Gear Direct Extruder】Our printer boasts a dual-gear direct extruder with a 5.2:1 reduction ratio for reliable filament feeding and optimal extrusion. The full titanium alloy throat pipe enhances heat dissipation, reducing filament clogs and maintaining consistent printing performance.