Salamander Pumps - Mains Booster HomeBoost Inline Pump - Boosts Flow to 12L/Min - Suitable for Mains Fed Systems - Quiet Mark - 3 Year Warranty

Product Information

The pump should be fitted directly into the incoming mains supply either just after the stop-tap or just before the combination boiler. It is advised to position the pump near the stop tap, installing either vertically or horizontally, but never upside down. Ensuring there is adequate airflow to cool the motor, and ensuring that it is separated from any other appliances that generate heat. Installation HomeBoost recognises when pressure and flow are low and boosts incoming water performance automatically. HomeBoost is an intelligent inline mains booster pump. It will boost the incoming mains water supply to the whole house to 12 litres per minute.

In conclusion, the Salamander HomeBoost Inline Pump is a smart and reliable solution for low water pressure in your home. Its intelligent design detects and boosts flow only when needed, ensuring optimal performance and energy efficiency. The pump should now be active, you should be able to hear the mechanism rotating when an outlet is opened. That’s bad news, unless you find the sound of a constant drone soothing, while you’re trying to sleep. Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide: Choose TankBoost for a busy home, or when you need to boost water to multiple floors to achieve that enhanced shower performance, even when other outlets are running at the same time.They are manufactured in the UK using top quality parts which are mostly supplied by the EU. The parts are extensively tested to ensure a long lasting and reliable product.

Flush the inlet pipework and fully fill the pump with water by opening all the water outlets before electrically switching the pump on. It is critical to discharge water through all the outlets, using natural flow before switching the pump on electrically. This will ensure that the air has been discharged from the connecting pipe work and pump chamber. 7. Plug the pump in Begin your installation by unboxing the pump and reading the installation guide, this is key to avoiding common installation pitfalls. You can now begin to install the pump, here’s how to do it in eight steps…. 1. Turn off the mains When considering boosting your water flow, it’s important to compare the HomeBoost inline pump with other available options to make an informed decision. Here are some other options to consider: These pumps require 15mm or 22mm isolation pump connections, along with an outlet flat washer and inlet filter washer.( Fittings kit available separately.) 4. Connect the pumpThese systems are identified by a wall hung boiler and metal-clad hot water storage tanks and no cold water storage.