Nitromors All Purpose Paint and Varnish Remover Ref 1985778, 350 ml

Product Information

Remove blistered and softened paint with a scraper or a shavehook. In difficult areas use an old nylon toothbrush. Repeat as necessary. Wash off with detergent in cold water and a nylon scourer or use white spirit and wire wool to avoid raising the grain on fine or laminated woods. Allow to dry thoroughly and rub down with fine sandpaper or wire wool prior to refinishing I have reported my findings on this product as honestly as I can but I was surprised the lengths the manufacturers have employed to try and have my copy altered to reflect their own view, which is that this product is a perfect replacement for the old formulation.

So you will inevitably get a variable result in terms of time and effort needed to strip any given surface. The heat gun removes the paint effortlessly by softening and swelling it. Just hold the heat gun directly towards the surface at a distance of about 10cm. You’ll notice when the paint will start to detach itself from the wood and at this stage, just use the putty knife to scrape it off. Spray liberally onto the surface or component from a distance of 15 to 20cm, ensuring a good coating So removing this troublesome surface has been an ongoing job that I have to psyche myself up for. That said it has given me the ideal place to test sanders, hot air guns and chemical strippers.

Nitromors Rust Convertor Pen 13ml

To achieve the best results for your new paint, apply a primer to the surface first so that the paint can easily bond to it Nitromors (formally "Nitromors Master Craftsman's Paint And Varnish Remover") is a paint-stripping chemical intended for do-it-yourself use. It is manufactured in the U.K. by Henkel Consumer Adhesives of Winsford, Cheshire. However, Nitromors is a non-drip gel consistency and can, therefore, be used on indoor vertical surfaces such as doors, stair spindles, and window frames etc. Nitromors is a chemical product and, as such, should be treated with great care whenever you’re working with it. Always work in a well-ventilated area (ideally outdoors), as the fumes from Nitromors are considered a health risk. Here are the safety warnings for Nitromors paint remover: The whole process is a lot less intrusive than burning or sanding but should be done with the windows and doors open to provide good ventilation.

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.You can indeed paint after using Nitromors, but you’ll need to make sure that you’ve properly prepared the surface for repainting. After using Nitromors and leaving the surface to completely dry out, you then need to: The new Nitromors formulation worked surprisingly well on the varnish but on other surfaces not as well as the pre-legislation product. Wash the surface using a scourer and cold water mixed with detergent, or use white spirit on fine wood (to avoid raising the grain).

These products react with the varnish or paint, dissolving it. However, this process is the most dangerous. While a sanding machine or heat gun come with their own hazards, paint strippers are harsh chemicals that can provoke burns and irritations. The ban on many solvents and the removal of lead from paint has undoubtedly had a beneficial effect on the health of painters and decorators across Europe and I welcome it. The challenge for Nitromors In this guide, we look at how to use Nitromors paint remover to help you with your home decorating project. As one of the leading brands for stripping paint and varnish, Nitromors has been around since the 1930s and is a popular choice for many DIY enthusiasts. Keep reading to find out more. How to use Nitromors paint remover To avoid side effects, use paint strippers in a ventilated environment – preferably outdoors. Don’t handle the product without gloves and wear a safety mask.The original product, up to circa 2006, came in two versions - "All Purpose" and "Master Craftsman". The active and main ingredient of both the original Nitromors versions was dichloromethane (also known as methylene chloride) accompanied by a smaller proportion of methanol. This product was recommended by the Guild of Master Craftsmen and the Guild's logo appeared on the tin. The current All Purpose version of the product, as of 2011, does not contain any of the active ingredient dichloromethane, and the logo representing approval by the Guild of Master Craftsmen no longer appears on the tin. Whether you’re restoring an old piece of furniture or making a transition from oil-based to water-based interior woodwork products, removing old paint is essential. If you follow the above steps, your surface will be ready to apply your fresh coat of paint. Job done. Can you leave paint remover on too long? Find sources: "Nitromors"– news · newspapers · books · scholar · JSTOR ( July 2010) ( Learn how and when to remove this template message)