Everbuild Foam Sealant Joint Backer Rod 10mm x 10 Metre

Product Information

The rod should be inserted into the joint, pushing it down until it reaches the bottom of the joint.

Bond-It GP200 is a multi-purpose, low modulus silicone rubber sealant with fungicide, suitable for most sealing jobs around the home. I must say that I expected a much bigger and sizeable roll of foam strip but it just came bound together in an envelope. Closed cell joint backing foam also known as backer rod or polycord, is a flexible polyethylene cord. They mention that it's a great product, works great in between floorboards, and is suitable for gaps 6 to 8mm high.illbruck FM330 is a one part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, airtightness and acoustic properties. We are passionate about the products we produce, we have always worked on the simple premise that Trade User will only come back for good products, so that's all we make! CRL Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The foam satisfies the fire resistance requirement of 240 minutes at a depth of 20 cm and is suited for quick and inexpensive sealing between concrete elements, Leca and similar where the top finish is not required.

It is easy to cut shape and insert and you cant tell its been there after the sealant product of your choice , whether plaster filler or silicon, is deployed over the top of it. Everbuild Tecnic Joint Backer Rod is a non-absorbent compressible grey closed cell polyethylene foam backup material. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate.Promotes an hour glass shape, this maximizes the bond area but keeps the depth of sealant consistent in the middle allowing for movement.