Joined in 2023 
82 
63 About this deal
With toolless, easy assembly, the official Creality enclosure consists of a rigid iron pipe frame held together by three-way connectors, on top of which sits a heat-containing cover to prevent drafts.
If you are on a budget and do not want to invest too much in 3d printing, then I recommend the Ender 3 Max Neo, which will meet your needs for printing large models with generally satisfactory results.For assemble, Creality Ender 3 Max Neo comes with 96% pre-assembled, you only need 10-20 minutes to put a few parts together in the first install, and then you can start printing straightly. Now that the major assembly work is complete there are two small white plugs to attach to the motors for both of the dual Z axes. Depending on what you want to work on in the Creality Ender 3 Max Neo, getting access can be a challenge. One of my standard 3D printing tests is a basic XYZ 20mm Calibration Cube and with the gray matte filament, I was really able to see the quality of the test. The Moisaic Palette 3 is the simplest way to upgrade the Ender 3 with a dual extruder solution without pulling your Ender 3 apart in the process. The best part: you don’t have to actively modify your printer to get multi-color and multi-filament printing.
The mainboard is both the brains and the conductor at the heart of the Ender 3. Upgrading the controller board can drastically improve 3D printing performance, especially on an older Ender 3 running a dated 8-bit board, that doesn’t play nice with the most recent firmware and doesn’t have the drivers to tame loud motor noises. Creality 4.2.7 Mainboard We tested a few filament materials like PLA and TPU and the final results turns very good. The model of the pitcher comes out of the printer flawlessly, with virtually no flaws and excellent detail. Benefits of the Ender 3 Max Neo One of the gripes we have with the Ender 3 Max Neo 3D printer is with its spool holder. It’s a hinged spool holder that mounts onto the side of the base. Just like with the V2 Neo, this is caused by subpar machining quality—it is a budget 3D printer after all—that results in coarse threads. It’s not a big issue and can be solved with a bit of extra force if necessary. In short, the build quality and safety are good. But there are certainly a few areas that Creality can improve on. Ease of Use 4.3″ Color Screen with KnobBesides running out of filament twice due to human error, the one failure of the print was the hinge for the lid. This was a print-in-place model which should have been no problem for the Max Neo, but the parts of the hinge didn’t print with enough space between them to work properly.
An enclosure protects a printer from dust and debris when not in use, extending its lifespan and minimizing the need for regular cleaning. Buyer’s Guide – Things to Consider When Choosing an Enclosure For Your Creality Ender 3 The Differences in Enclosing Each Ender 3 Printer We recommend you keep your prints near the bed center to improve your chances of success. 32-bit Controller Board Over the past few years, I’ve discovered plenty of both paid and open-source Ender 3 mods that have allowed my device to punch above its price point.
What is it?
Although not essential, you may want to consider an enclosure, whether DIY or pre-made, fitted with a vent/exhaust and air filtration system.
Perfect coordination among dual Z-axes, timing belt and dual motors guarantees the stability and higher printing precision. As old as the DIY RepRap printers that brought 3D printing to the masses, Marlin firmware is an open-source option that pairs particularly well with all Ender 3 models. The tents are typically made of flame-retardant plastic sheets (to cater for photography lights placed inside) that do a reasonably good job of containing heat, offering the Ender 3 a cozy environment to print filaments like ABS. It’s not the most insulative, but for those on a budget, it’s more than sufficient for most print projects. A large front-facing velcro panel allows you to view and access the printer, while dual side-mounted zippers see the front and cover open up completely for even easier access to the printer. If you’re looking for an enclosure that ships with all the bells and whistles with the price tag to match, then look no further than Innovator 3D Printer Enclosure.Once I added the Max Neo profile to Cura it was as easy to prepare models for printing as with any other 3D printer I’ve worked with. We were also pleased to see that the sensor in use is the CR-touch, Creality’s version of the BL-touch sensor. The Creality version uses a metal pin to probe the bed, which is an improvement since the plastic pins of the BL-touch sensor can break or bend if they collide with a misprinted part. We have found the CR-touch to be reliable and consistent over many prints. Part Cooling Preassembly has solved those hassles and worries of parts assembly. Start your print with just 3 steps. We recommend enclosures that offer well-placed vents to move air away from these components like on the 3D UpFitters enclosure or allow you to house them outside the enclosure or away from the heat sources (nozzle and bed). Assembly and Storage
Great Deal 
New Comment 